Ниже представлена эта же страница в формате, позволяющем производить копирование текста.

2014-Обработка глубоких отверстий EN

Для заявок - info@sandvik-nedorogo.ru
To make life easier, a new standard is developed
DEEP HOLE MACHINING
ISO 13399 is an international standard that will simplify the exchange of data for cutting tools. You will notice a slight difference through
the new parameters and descriptions of each tool.
For the first time ever, there is a standardized way of describing product data regarding cutting tools. When all tools in the industry share the
same parameters and definitions, communicating tool information becomes very straightforward.
What does this mean to you?
Basically, it means that your systems can talk to ours, as they all speak the same language. Download product data from our web site and use
it directly in your CAD/CAM software to assemble tools that you use in production. There is no need to look for information in catalogues and
interpret data from one system to another. Imagine how much time this will save you!
Short name
ADJLX
ADJRG
ALP
AN
ANN
APMX
B
BAWS
BBD
BBR
BD
BHTA
BS
BSG
CF
CDX
CHW
CICT
CND
CNSC
CNT
COATING
CP
CRKS
CTPT
CUTDIA
CW
CWTOLL
CWTOLU
CWX
CXSC
CZC
CZCMS
CZCWS
D1
DAH
DAXIN
DAXX
Preferred Name
Maximum adjustment limit
Adjustment range
Clearance angle axial
Clearance angle major
Clearance angle minor
Depth of cut maximum
Shank width
Body angle workpiece side
Balanced by design
Balanced by rotational test
Body diameter
Body half taper angle
Wiper edge length
Basic standard group
Spot chamfer
Cutting depth maximum
Corner chamfer width
Cutting item count
Coolant entry diameter
Coolant entry style code
Coolant entry thread size
Coating
Coolant pressure (recommended)
Connection retention knob thread size
Operation type
Work piece parting diameter maximum
Cutting width
Cutting width lower tolerance
Cutting width upper tolerance
Cutting width maximum
Coolant exit style code
Connection size code
Connection size code machine side
Connection size code workpiece side
Fixing hole diameter
Diameter access hole
Axial groove inside diameter minimum
Axial groove outside diameter maximum
DEEP HOLE MACHINING
info@sandvik-nedorogo.ru
www.sandvik-nedorogo.ru
1
Заявка